Details

---

A premium solvent-based vinyl-toluene acrylate primer.
Alkali resistant and efflorescence resistant
Good penetration on powdery surface
Improves the opacity of subsequent finish paint

Product Description
Dulux Weathershield Primer is a premium solvent-based vinyl-toluene acrylate primer sealer which promotes adhesion of new paint onto existing painted substrate.

Application Description:
Roller or brush

Health & safety
Hazard warnings
Toxic to aquatic organisms, may cause long term adverse effects in the aquatic environment. Repeated exposure may cause skin dryness or cracking. Avoid contact with skin. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. To remove splashes of paint from skin, use soap and water or a recognized cleanser. If swallowed seek medical advice immediately and show this container or label. Keep away from food, drinks, animal feed and out of reach of children. Keep away from combustible material. Container must be stored in a cool and shaded place. It must be tightly closed in a secure, upright position. Work in a well-ventilated area and do not breathe in vapor or spray. A suitable mask should be worn during sanding. When applying paint, it is advisable to wear eye protection. In case of firm use foam, dry powder, AFFF, CO2 never use water. In case of spillage, contain and collect spillage using sand or earth and do not empty into watercourses, drains or environment. Dispose of any paint waste in accordance with the appropriate Environmental Quality Regulations. Refer to Dulux Product Safety Data Sheet for further details.

Tips & Advice
Preparing the Surfaces
Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax. Remove all loose or defective paint or powdery residues by thorough brushing and scraping, using a stiff fiber brush and high pressure water jet. Treat any areas affected mould, lichens, algae and moss with Dulux Fungicidal Wash. Make good minor defects with a suitable exterior grade Filler. Surfaces that remain powdery, friable or chalky after thorough preparation should be sealed with one coat of an appropriate Primer (see below). It should not be applied on areas where moisture reading (as measured by Protimeter) exceeds 17%. These wall should be left to dry further.

Cleaning
Clean all equipment with Dulux Thinner 850-41 or white spirit immediately after use.

Storing
Keep away from food, drinks, animal feed and out of reach of children. Keep away from combustible material. Container must be stored in a cool and shaded place.