Details

---

DESCRIPTION:
PENTENS FLESEAL T-200 is based on a newly developed Acrylic Polymers and it is dramatically reduces solar heat absorption in either air-conditioned or non-air conditioned buildings. It takes the majority of the heat load off a building's skin and reduces temperatures to approximately that of outside shade. Can use to RC gutters and planter boxes, floor slabs, deck, wood siding/fences, external, wall, flat roof, metal roof, concrete structures. It also can apply to sealing cracks and joint on wall, ceilings and roofing.

ADVANTAGES
Water based, environment friendly
Gas and oil resistant
UV Blockers
No blistering, cracking and peeling
Chemical resistant and waterproof
User friendly, suitable use on any surface
Can withstand foot traffic
Non-toxic

USES
PENTENS T-200, which is one-part elastomeric cross linking latex copolymer emulsion designed as exposed waterproofing coating on:
RC gutters and planter boxes
Floor slabs
Deck
Wood siding/Fences
External wall
Flat roof
Metal roof
Concrete structures

APPLICATION
Surface Preparation
Surface must be sound, dry and clean (free of dirt, gravel, pollution, mildew and all foreign material). Apply if any rain is imminent. Repair flashings and damaged areas. Cracks and old bitumen joints shall be repaired first.
Application
Substrate should be primed with a 1:3 mixture of PENTENS T-007 and water. Brush on at the approximate rate of 0.3 kg/m. PENTENS T-200 is suggested to apply at least 2
coats. The first coat should be applied in one direction only. If possible the second coat should be applied at right angles to the first.
Leave to cure for approximately 8 hours before applying second coat. PENTENS T-200 can be installed with conventional airless spray equipment, brush or roller.

*** PLEASE SPLIT ORDER IF YOU WISH TO ORDER MORE THAN 1 UNIT ***

//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

自取请选择 For SELF PICK UP : -
- CHOOSE "Others (West Malaysia)"
- Proceed payment & get your product at the following address

永合兴五金机械
YONG HUP HENG MACHINERY HARDWARE
+6018 9644 365
180 & 182, Jalan Layang 16, Taman Perling 81200 JB Johor