Details

---

Features:
1. It is colourless and transparent; thus, it will not damage the original wall decorations after applying;
2. It is high and low temperature resistant, non-toxic, environment-friendly and water resistant;
3. The coating has good strength and extensibility;
4. It is easy to use and can be directly sprayed, painted, brushed, and scraped on wall surfaces and keep the original decorative layer.
产品特点：
1.无色透明；因此，施工后不会破坏原有的墙面装饰；
2.耐高低温，无毒，环保，防水；
3.涂层具有良好的强度和延展性；
4.使用方便，可直接喷涂，喷涂，刷涂和刮擦在墙壁表面，并保留原有的装饰层。


Application Range:
1. Excellent for leakage repair of exterior walls, bathroom walls and floors of various buildings without destroying the original tiles;
2. Ideal for waterproofing and moisture-proofing of surfaces and joints of various interior and exterior wall decorations;
3. Act as a protective layer of various waterproof and coated surfaces (such as bridges, swimming pools, landscapes, construction machinery, foam plastic).
适用范围：
1.擅长修补各种建筑物的外墙，浴室墙面和地板的渗漏，而不会破坏原始瓷砖；
2.适用于各种内外墙装饰的表面和接缝的防水和防潮；
3.充当各种防水和涂层表面（例如桥梁，游泳池，景观，建筑机械，泡沫塑料）的保护层。


Application Methods:
Base Surface Preparation:
1. For tiles, use a rag or gauze to repeatedly polish the surface of the tile with talcum powder or cement. After polishing, clean the dust and oil off the surface of the tile.
2. After cleaning, the base surface must be kept dry before applying QL-No. 3.
施工方法：
1.对于瓷砖表面，用碎布或纱布将滑石粉或水泥在瓷砖表面反复用力打磨以除去瓷砖表面的抛光腊及油污， 打磨过后将瓷砖表面清洗干净，对于混凝土或水泥基面保持表面干净无油污，浮尘即可
2.清洗干净后的基面必须保持干燥才可进行青龙三号的施工


Brushing QL-No. 3:
1. Mix the components A and the components B of QL No. 3, using a ratio of 1:1 in terms of weight.
2. After completing the application, make sure that the room is well-ventilated. The sections which are not in long-term contact with water can be used as per normal after 12 hours. The sections which are in long-term contact with water can be conserve as per normal 7 days to achieve the best results.
3. For toilets, pools and places which are always in contact with water, waterproof the vertical surface first, and the height of the coat must reach 1.5meters.
**The reference consumption is 0.1kg/m2 (thickness is 0.1mm).
4. Thereafter, paint the horizontal surface.
**The reference consumption is 0.2kg/m2 (thickness is 0.2mm).
5. For the sections which are not in long-term contact with water such as balconies, apply the product directly on the gap between the tiles.

青龙三号涂刷：
1.将青龙3号的A组份，B组份按1:1的重量配比混合均匀
2.施工完毕后，保持室内通风，对于非长期浸水部位12小时后即可正常使用，长期浸泡水的部位养护7天才可达到最佳使用效果
3.对于卫生间，水池等长期浸水部位，先进行立面防水涂刷，涂刷高度须达到1.5米，参考用量为0.1kg/m2 (厚度为0.1mm)
4.立面涂刷完后进行平面涂刷，参考用量为0.2kg/m2 (厚度为0.2mm)
5.对于阳台，天台等非长期浸水部位可直接涂刷于瓷砖接缝上

Product Specifications 产品规格
Size: 1kg

Product Usage产品用量
【1kg for 53.82ft2】

------------------------------------------------

自取请选择 For SELF PICK UP :

- CHOOSE "Others (West Malaysia)"
- Proceed payment & get your product at the following address

永合兴五金机械
YONG HUP HENG MACHINERY HARDWARE
+6018 9644 365
180 & 182, Jalan Layang 16, Taman Perling 81200 JB Johor